How to Set Up a Home Network- Beginners Guide

home-networkingToday almost every home and small business has a local network, and an Internet connection.

The home network or small area network enables multiple devices e.g. PCs,tablets etc to connect to each other, and also to connect to the internet.

In this tutorial you will learn how you to build and setup a home or small business wireless and wired network, and connect it to the Internet.

Quick Links

Choosing a Wired or Wireless Network

Do You Build a wired or Wireless Network? which is best?

Early (pre 2008) home networks were predominately wired networks.

Wired networks use Ethernet over UTP cable and tend to be faster than wireless networks, which is an important consideration if you are a gamer. The simple wired home network diagram below shows a minimum setup with a switch and broadband router.


Wired Network Advantages

  • Fast typically 100 Mbps to 10 Gbps
  • Secure and reliable.

Wired Network Dis-Advantages

  • Doesn’t work with devices that don’t have an Ethernet port e.g. tablets and smart phones.
  • Not so easy and fast to setup as it requires running cables. However Homeplug or powerline adapters can be used instead.
  • Not so easy for visitors and mobile devices (laptops) to connect to.

Main Uses

It Is best used for network backbone i.e. connecting between router,network switches and wireless access points on different levels (floors).

See How to Wire your Home Network

Home Wireless Networks

Today most home networks are Wi-Fi networks.

The installation of wireless networks using Wi-Fi is quick and easy, but wireless networks are generally slower than wired networks. See Wi-Fi and Wireless networks for more details.

Wireless Network Advantages

  • Easy installation and  set up from an end user perspective.
  • Allows easy access to smart phones, Tablets and mobile devices.
  • No cables to run.

Wireless Network Dis-Advantages

  • Not as Secure as wired networks without proper configuration, and easy to set up insecurely.
  • Not as fast as wired networks.
  • Not as reliable as wired networks.

Main Uses

Connecting peripheral devices like computers,smart phone,tablets etc.

Most home network installations will use a mixture of wired and wireless.

However small home and home office networks will generally be Wi-Fi only.

Setting up a Home Network -Components and Structure

Today however most home and small business office networks will use a wireless network or mixed network, as most people use Smart phones, and tablets which don’t have Ethernet support.

The main components required to build a typical home/small business network are:

  • Router or Wireless router – Connects the network to the Internet.
  • Wireless Access Point – Used to Connect Wi-Fi equipped devices to the network.
  • Ethernet HUB or Switch -Used to Connect Ethernet equipped devices.
  • Cable cat 5, cat5e or cat 6 with RJ45 connectors.
  • Telephone Cable with RJ 10 connectors.
  • Broadband Filters.

The home network diagram below shows the structure of a typical small home network using a wireless router and connected to the Internet.home-networking-diagram

For most home networks the Wireless Router or Hub which connects the network to the Internet will be the main component of the home or small home office network, and in many cases it will be  the only component.

The Wireless router usually incorporates a Wireless access point, Ethernet switch, DSL modem and Router in a single box.

This short video shows how to use a Wireless Home Hub ( BT) or router to create a home network that is connected to the Internet.

Video Notes:

DSL Modem– converts digital signals into analogue signals that are suitable for sending over a telephone line. It is usually built into the Internet/broadband router and is not normally purchased as a separate component.

DSL/Broadband Filter– Used to filter out DSL signals from telephone signals so that you can access the internet and use the telephone simultaneously. Often included as part of the connection socket.

See How to Setup and Configure your Home Router

Install Location of a Wireless Router

The Wireless router will need to connect to the telephone line, cable or fibre network access point in your home.

Therefore most people locate the Wireless router near to the main telephone socket.

However you can usually change the location by using telephone extension cables or longer WAN cables.

Note: WAN cables use the same connectors (RJ45), and cables as Ethernet cables.

Because the Wireless Router provides the Wireless access point then you should install it in a central location, if possible, to get the best wireless reception.


  • Hide it in a cupboard
  • Install it behind the sofa
  • install next to motors,microwaves,cordless telephones

Testing Your Wireless Signal

The easiest way of testing you signal strength in various locations is to use the inSSIDer Wi-Fi checker which is an App that you can install on your Android Tablet or phone.

The general idea is to install the Wireless router in its preferred location and then move around the house with the inSSIDer Wi-Fi checker, check the signal strength, and then adjust the location if necessary.

Extending Your Home Network

In large homes/offices it may not be possible to connect all devices directly to the Wireless router and so you will need to purchase additional networking components.

You can extend your home network by:

  • extending your Wi-Fi coverage by installing additional Wireless Access Points or a more powerful access point.
  • or you can extend the Wired network by running cables into other rooms
  • or using your power cables by installing home plug adapters. See How to extend a Home Network

Home Router Setup

To administer the home router you access it via a web browser, and login using a username and password.

Before you allow devices to connect to your home network you should make some basic changes to the default setup parameters of your router.

The two important one are the SSID used to access the Router and the router admin password as the default username/passwords are well known, and published on the Internet.

See How to Setup and Configure your Home Router and Setting up a secure wi-fi home network.

Connecting Wi-Fi Devices

The standard way of connecting a Wi-fi device to a Wi-fi network is the connect to the network and enter the password when prompted.

However most modern Wi-Fi routers/hubs support a feature called WPS ( Wi-fi protected setup).

This usually involves pressing a button on the wi_fi router and a corresponding WPS connection button on the Device.

The devices then connect without requiring you to enter a password. See Wiki on WPS

Home Network IP Addresses

All of your devices will need an IP address.

This is provided automatically by a service called DHCP which, by default, is provided by the home router.

IP address provided by the DHCP server are known as dynamic addresses, as they can change. You can also assign addresses manually, and these are known as static addresses.

Static Addresses are not normally assigned but are often required when using Port forwarding.

They can be assigned on the network settings of the device, but preferably on the DHCP server using reserved addresses.

Additionally the addresses used on your home network are known as internal addresses.

When you connect to the Internet your device will use an external IP address. This address is the IP address of the router/hub. See Internal vs external IP addresses for a more detailed explanation.

Finding Your DNS, IP, MAC Addresses and Router IP Address

You may need to find out what DNS servers you are using or the IP or MAC address of:

  • Your Home Router.
  • Your own computer/tablet/phone

The main tool you use is the ipconfig (windows) or ifconfig (linux) tool.

The screen shot below shows the ipconfig command use with the /all switch. i.e. ipconfig/all


Your home router is your gateway to the Internet. When viewing your configuration some devices refer to it as the default router whereas other use the term default gateway.

In the screen shot above it is

Splitting Your Home Network

For security reasons you may find the need to split your home network. This is especially true in small business networks like restaurants etc were customers are also given access to the network.

Many modern routers will provide guest networks for this purpose, and is easy to setup.

Another common method, but not as simple is to use VLANs. See Understanding and using VLANs

Connecting to Internet

Your home router connects to the internet and acts as a Firewall.

A firewall protects your home or small business network computers and devices from intruders on the Internet.

It effectively acts like a one way digital gate blocking access to your network from devices on the Internet, but at the same time allowing devices on your network to connect to devices on the Internet. (schematic diagram below)


Generally there is no configuration required as the default behaviour is only to allow connections from the local network to the Internet, and not from the Internet to the home network.

See Home router setup for more details.

However if you do require devices on the Internet to connect into your network (often required by gamers) then you can configure port forwarding.

You may also want or need to use dynamic DNS– see What is Dynamic DNS ?  and Why Use Dynamic DNS Services?

Checking Network and Internet Speeds

On any network the speed is restricted by the slowest component.

A computer with a Gigabit network card talking to a computer with a 100Mbit/s network card is restricted to 100Mbit/s.

Shared devices like switches and Wireless access points are network choke points just like traffic lights and roundabouts on a road.

LAN Speed test is a very useful tool for testing your local network speeds. See understanding Home network speeds.

For Internet speeds you can use online speed test sites. See Understanding Internet speeds and speed tests.

Home Network and Internet Connection Problems

You will invariably have connection problems from time to time.

In my experience most problems are easily diagnosed, and fixed with a little patience and perseverance.

Having a good understanding of how your network fits together, and works is essential for successful troubleshooting.

Questions and Answers

Q- What is the difference between a router and a Wireless Access Point (WAP).

A- A router connects the home network to the Internet a WAP connects a device to a network.

Q -How do I check my home network Speed?

A- See Understanding home network speeds

Q- Do I need a landline or cable to connect to the internet?

A -Not any more. Wireless connections are getting more popular. See Internet connection methods for more details.

Q- Can I have more than one Internet connection?

A- Yes and this is becoming more popular see setting up backup Internet connection



Home Networking Setup Quiz

Quick Quiz to test your knowledge of smart Home networking

Related Tutorials and Resources:

Please Let me Know if you found it Useful
[Total: 111 Average: 3.4]


    1. Yes if you don’t configure access to dns then that will work. I addition some routers will let you restrict access based on the device MAC address.

  1. We have ATT internet fiber with a router that is extended by Google home pods (4) placed throughout our house. We have TVs, amplifiers, printers, computers, phones, Google speakers, etc. all connected wifi to the home wifi network. Some of these devices “disappear” from the network from time to time, then they will come back from time to time. We are using dynamic IP. It seems to me with the IP changing all the time, devices take their time connecting when the IP address changes. Am I correct in my thinking here, and how can we get everything to stay connected. It’s a squirrelly and frustrating experience.

    1. It is more likely to be the Wi-fi connectivity. A device on dynamic IP keeps its address and is unlikely to loose it on a home network.

    2. Need more info on setting up a guest network. My application thought is:

      We just installed solar panels that will need to connect to my network to enable monitoring. Some monitoring will be done by the provider. They currently have my home network password to set this monitoring up. I am uncomfortable with an external having my password. Do u agree this an appropriate application for a split home network? If so, can u direct me to where I can get more info to help with this plan?

      1. I would imagine that they only need that for setup. Once they are done you can change your home network password.
        A guest network would not help you here.

  2. I am in a rural area and my grandmother broke a hip and elbow this year. It was important to me she didn’t go into nursing home so I moved in. I am not technology Savy after a bad accident but I need to go back to work. I was offered a job and like the rest I’ve applied they need a hardwired internet connection. The only company in the middle of cowboy hell nowhere Oklahoma is who I already have and my phone company entirely to slow 15 Mbps download and 1 upload. All the jobs I have applied for require a minimum 6 or higher upload and the only other available option is Hughes net which would only give me 3 msps upload and wouldn’t work anyway. My daughter works at home a street away and uses home internet company I have Ethernet connected but USB plugs in att mifi which brings the speed way more than required but on the internet speed test required for the customer service at home jobs I am applying and need do not allow any wireless wifi connection and the company that comes up on speedtest isn’t the home slow internet it comes up the att wireless. So I can’t get a job anywhere. I can’t afford to be out of work a moment longer but I will not leave my granny it’s the honor of my life to help her. If you know how I can mask the mifi or legit or not say home broadband company I’m not Savy to technical terms please help anyone?

    1. Not quite sure about the setup but think that you are using your daughters connection with wi-fi.Is that correct?

  3. If I have a mixed setup as you have described will I be able to transfer files from a wifi tablet to my wired primary computer?

  4. Hi. I’m in the UK and I have a Virgin Media hub 3.0 for my fibre internet and the wi-fi signal was not good so I bought a TPLink Deco mesh M9 which is now giving us great wi-fi coverage. Trouble is I now have 2 subnets, and although I disabled both wi-fi AND DHCP server in the Virgin hub, all my wired devices are on 1 subnet and my wi-fi devices are on a second, and they don’t talk to each other!

    I don’t understand how I have a 2nd subnet when the Virgin hubs’ DHCP was disabled! Any help someone please?

    1. Are you sure they are on the two subnets. What are the ip addresses of an example device on each subnet?
      Do you have any other devices (routers,switches) other then the mesh devices and the virgin router?

    2. I just had a quick look trough the manual and it defaults to router mode as you are still using the virgin router put it in access point mode

  5. Hello,
    I would like to setup a home network using a standard router and then connect the network to the internet using a mobile phone.   Are there instructions available for this type of setup? I understand one method which is to usb tether the phone to a pc and use windows internet sharing but this requires a pc to be on 24/7. Is there a better way. Perhaps using a bridge?
    Plevna Ontario 

  6. I have an existing Belkin router and need to expand the coverage to three locations.. one location needs to be connected to another computer…the other areas just need better coverage for wireless devices. What do I need to accomplish this task.

  7. I have very slow dsl modem, however I want to run my other computer on a home network to share files how can i bypass the slow modem that came with bell to get the connections between the other computers the fastest to share files between the computers

    1. Hi
      I’m assuming all of your cables go through the modem Ethernet ports which are slow.Just get a GB ethernet switch and plug all your ethernet cables into it and one cable connects your GB switch to the modem Ethernet which gives your devices Internet access.

  8. Re Q. 7
    The answer is WRONG!
    A filter is imposed BEFORE the router, the filter usually supplies a feed direct to a landline phone. The smart phone picks up its signal from the output of the router.
    I’m not a keyboard johnnie, I have installed hundreds of routers.

  9. Hi there,

    I have a used HP 1920-8G-POE+, that I was going to use once I had fibre installed. It was to run Cat5 around and add POE AP’s in various locations to have full WiFi over 3 storey house and garden areas. I don’t have a console cable to access the switch. Is there another way, or only with that cable.
    Fibre has been delayed in my area for 12-18mths. Got ADSL broadband 20Mbps. Could that still work through the switch, or would I be expecting too much. It’s a family of 5 with numerous wifi enabled devices.

  10. Thank you for information. I have a little different issue I am having trouble with. I have windows 10 computer and a windows server 2012 as a backup and storage. I have home movies I want to access from a 3rd Windows 10 computer. I have no cable internet access as I am out of the service area. When I do connect to the internet, it is with my smart phone as a hotspot. I have to work from home quite a bit, so as far as I know, I cannot set up a wireless router and static IP addresses. The server and Windows 10 computer 1 see each other and communicate easily without problems. I have each hard wired into a netgear switch. I connected Windows 10 computer 2 to the same switch, but cannot connect to each of the other 2 units (Windows 10-1 and server 2012). I checked the windows credentials and don’t see an issue here. User names and passwords match on each machine.
    Do you have any advice about how to get the Windows 10-2 computer to talk to the other 2?
    Your advice is appreciated.

    1. John for all computers to see each other they would need to connect to the hotspot on your phone. You can buy mobile wi-fi routers which would be a much better solution.
      This one doesn’t have ethernet
      but I’m sure you can find one with an ethernet port that you can then connect to your existing switch
      This one is cheaper not as fast but has an Ethernet port

  11. Hello Steve,
    I was wondering if you could help me with the problem I’m having. I have my work PC connect to the web through WIFI. I want to connect a second PC to my work to work pc by cable to get internet (it doesn’t have wireless connection). On my work pc. i went to network and internet setting and enables sharing.
    But I still can’t establish a connection. They are both set to automatic IP setting.
    what do you suggest I should do?

  12. I have a work computer and a home laptop. The work computer is wired to my router and a line to my wall. I use wifi on my laptop. I have one modem/router for both. Is my connection for home use private or can my company access my interaction on my laptop since I know they can pop onto my screen to see what I do on the work computer. What sort of networking would I need to have to prevent them from joining onto my personal laptop?

    1. I would assume that the company installed software on the work computer to allow them to access it remotely.
      You should’t have any on your personal laptop unless you installed it and so you should be Ok with a normal home network.

  13. The UTP cable is probably the connection to the phone socket which is common with ADSL and Fibre connections. If you have cable or fibre to the home then this is usually a coax cable.
    Does that make sense?

  14. I have a wired (Ethernet) home network which was installed at least 10 years ago. We were able to share files, printers etc on 3 laptops around the home We had a very good internet service to manage the network. It identified any additional hardware and installed it into the system. However, it was bought out by Corel some years ago and closed down! Nothing similar that I could find has appeared since. Now with Windows 10 eliminating Home Group we have so far been unable to set up a replacement network. Windows instructions for sharing on a home network are complex to say the least! So what now? Do I need to uninstall the remnants of the old network and install some thing new? What is it? Perhaps there is a programme somewhere like the one described above? Going wireless is not an easy option because of interfering structures in the home. Thanks for any advice.

    1. Don
      You didn’t say what the service was called that you used.

      I wasn’t a big fan of home group I think they messed networking up after windows XP.
      On my home network I share printers and folders on different windows machines and Linux machines using Windows networking.
      To make it easy you need to create a user account with the same name and password on each machine and if you can be as open as possible (use everyone) when sharing as it makes it easier.
      The difficult part with sharing is security so just be careful what you share.
      Once you are setup and it is working then you can change it to make it more secure if you need to.

      1. Steve,
        Thank you for your good advice. I can’t recall the name of the service sorry. A problem of age and memory! I’ll have a shot at the steps you suggest.

    1. I haven’t worked with IP phones. But from what I understand they don’t connect to you normal telephone exchange but to an IP exchange and so the phone signal and Ethernet signal don’t exist together.

  15. I use two laptops, one a primary for everyday use, the other a secondary for backup purposes. Both have Ubuntu Linux as their operating system. I can use both to access the Internet via the router/modem provided by the ISP, either simultaneously or separately, but I have never been able to get them to “see” each other. There does not seem to be a way in Ubuntu to view the “elements” of a network. I would like to synchronize files between the two but cannot at present do this. I found out about an application called “rsync” that should accomplish this in the Linux terminal but I don’t know the commands and syntax to use, particularly as the two laptops seem to be invisible to each other. I have facilitated file sharing in the relevant folder of the secondary laptop.
    There is a status page from the ISP that shows the ISP addresses that have been allocated but I don’t know how to use these addresses in rsync. The whole situation is confusing me. Can you help in any way?
    Thanks in advance for any response.

    1. You should be able to ping each machine from the other one. use ifconfig to get the ip address of each machine and do ping ipaddress from each machine. It should work.
      profived it does then take a look here
      it’s about rsync.

      If that doesn’t work the it may be easier to install samba on each machine and use that.
      Let me know how you get on

  16. Hi Steve,
    You have a great website. I like how you cover most important networking concepts and components in a clear and concise manner.

    I disagree with question 4 on the quiz.
    Configuring your DNS server correctly Is an Important part of setting up a Home Network to connect to the Internet?
    You say answer=No, I think it should be Yes

    If your computer does not have at least one proper DNS IP address configured, it cannot connect to the internet.

Leave a Reply

Your email address will not be published.