The networking commands are mainly used for getting network system information and troubleshooting networking problems. Here we look at the
Continue readingAuthor: steve
Home Automation Timer with Node-Red
One of the most common requirements in home automation is to schedule an event at a particular time. For example
Continue readingMulticast DNS (MDNS) on Home Networks
Multicast DNS is part of Zero-configuration networking (zeroconf) set of technologies designed to enable devices to work on networks without
Continue readingCreate a Home Network DNS Server Using DNSMasq
DNS (Domain name Service) is a service that provides domain name to IP address resolution for computers on the Internet.
Continue readingUsing Zigbee2MQTT- A Beginners Guide
Zigbee2MQTT is a nodejs Gateway application that connects Zigbee networks to MQTT networks. It is run from the command line
Continue readingControlling the Tasmota SonOff Switch with HTTP and Node-Red
Tasmota devices can be controlled by both HTTP and MQTT. If you don’t have an MQTT broker or don’t want
Continue readingUsing HTTP To Control Smart Home Devices
HTTP is currently probably the most widely used control protocol on home networks. To troubleshoot control problems, and to develop
Continue readingUnderstanding Home Networking Speeds
A home typical home network consists of many different components, such as: Wi-Fi Router Wi-Fi Extenders Homeplug adapters Ethernet cards
Continue readingInternet and Home Network Parental Controls
Today all children have access to the Internet either via a smart TV, computer or Smart phone. It is often
Continue readingHome Network Subnet Mask Explained
Setting up a device on a home network sometimes requires that you manually enter an IP address. However an IP
Continue reading