When you install a Tasmota or Shelly device on a network it is usually automatically assigned an IP address by
Continue readingCategory: tasmota
Setting Tasmota Timers with MQTT
Tasmota devices have 16 timers that you can program to schedule events using either the http or MQTT protocols. In
Continue readingUsing Tasmota Devices with Home Assistant and MQTT
Tasmota is a small open source home automation software that can be flashed onto any expressive chipset and used to
Continue readingControlling the Tasmota SonOff Switch with HTTP and Node-Red
Tasmota devices can be controlled by both HTTP and MQTT. If you don’t have an MQTT broker or don’t want
Continue readingControlling the Tasmota Switch with Node-Red and MQTT
The tasmota firmware supports both the http and the MQTT protocol and you can use either protocol to control the
Continue readingSetting up the Tasmota MQTT Switch (Sonoff)
Normally the Sonoff switches don’t support MQTT but you can buy flashed devices that run the Tasmota firmware that does.
Continue reading